Wood Coatings

Located at Gujrat, India, we are engaged in providing Wood Coatings services to protect wood surfaces from termite. We have skilled and diligent team of professionals who have deep knowledge to coat the wood in precise manner. A thin and shiny coating which provide by our highly experienced professionals is the best for reducing seeping process of wooden. We use premium quality chemicals and innovative tools to render the offered Wood Coatings service as per the clients.

Key Points:

• Believes in clients satisfaction
• Easy payment mode
• Easily available after completion of work

WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.

METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.

(2)Apply putty if required

(3) Apply first primer thin coat on clean & dry surface

(4) Apply second & third coat on first coat

(5) Stoving should be done for stoving lacquers.

High Glossy And Matt Finish Lacquers

Acrylic , Epoxy, Amino, Polyurethane based water and solvent diluted lacquers for coating of metals, cement walls, cement board, RCC & wood floor coatings. This lacquers coating are formulated for waterproofing & weatherproofing, resistance to abrasion, acids, alkalis, saline weather, solvents, chemicals, mould, algee and fungus growth. It forms joint less finish coat in heavy duty coating system for metal, wood, concrete and masonry surfaces for exterior and interior use.

WHERE TO USE:-Use On wood, metal, Terrace, Appliances, Machineries, wall, wooden and Rcc floor, Swimming pool, Electric & electronics instruments, For Paver block and Tiles.

METHOD OF USE:- (1) SURFACE PREPARATION:- Surface should be Dry, clean, even and free from dust, dirt, paint, rust, Algee, grease, soluble salt, or other contaminations and Damp free. For cleaning use hand or power tools and cleaning chemicals / paint remover and then use rust remover or sand blasting wherever required.

(2)Apply putty if required

(3) Apply first primer thin coat on clean & dry surface

(4) Apply second & third coat on first coat

(5) Stoving should be done for stoving lacquers.